\(\renewcommand{\AA}{\text{Å}}\)

pair_style coul/diel command

Accelerator Variants: coul/diel/omp

Syntax

pair_style coul/diel cutoff

cutoff = global cutoff (distance units)

Examples

pair_style coul/diel 3.5
pair_coeff 1 4 78. 1.375 0.112

Description

Style coul/diel computes a Coulomb correction for implicit solvent ion interactions in which the dielectric permittivity is distance dependent. The dielectric permittivity \(\epsilon_D(r)\) connects to limiting regimes: One limit is defined by a small dielectric permittivity (close to vacuum) at or close to contact separation between the ions. At larger separations the dielectric permittivity reaches a bulk value used in the regular Coulomb interaction coul/long or coul/cut. The transition is modeled by a hyperbolic function which is incorporated in the Coulomb correction term for small ion separations as follows

\[\begin{split}E = & \frac{Cq_iq_j}{\epsilon r} \left( \frac{\epsilon}{\epsilon_D(r)}-1\right) \qquad r < r_c \\ \epsilon_D(r) = & \frac{5.2+\epsilon}{2} + \frac{\epsilon-5.2}{2}\tanh\left(\frac{r-r_{me}}{\sigma_e}\right)\end{split}\]

where \(r_{me}\) is the inflection point of \(\epsilon_D(r)\) and \(\sigma_e\) is a slope defining length scale. C is the same Coulomb conversion factor as in the pair_styles coul/cut, coul/long, and coul/debye. In this way the Coulomb interaction between ions is corrected at small distances r. The lower limit of \(\epsilon_D(r \to 0) = 5.2\) due to dielectric saturation (Stiles) while the Coulomb interaction reaches its bulk limit by setting \(\epsilon_D(r \to \infty) = \epsilon\), the bulk value of the solvent which is 78 for water at 298K.

Examples of the use of this type of Coulomb interaction include implicit solvent simulations of salt ions (Lenart) and of ionic surfactants (Jusufi). Note that this potential is only reasonable for implicit solvent simulations and in combination with coul/cut or coul/long. It is also usually combined with gauss/cut, see (Lenart) or (Jusufi).

The following coefficients must be defined for each pair of atom types via the pair_coeff command as in the example above, or in the data file or restart files read by the read_data or read_restart commands:

  • \(\epsilon\) (no units)

  • \(r_{me}\) (distance units)

  • \(\sigma_e\) (distance units)

The global cutoff (\(r_c\)) specified in the pair_style command is used.

Mixing, shift, table, tail correction, restart, rRESPA info

This pair style does not support parameter mixing. Coefficients must be given explicitly for each type of particle pairs.

This pair style supports the pair_modify shift option for the energy of the Gauss-potential portion of the pair interaction.

The pair_modify table option is not relevant for this pair style.

This pair style does not support the pair_modify tail option for adding long-range tail corrections to energy and pressure.

This pair style can only be used via the pair keyword of the run_style respa command. It does not support the inner, middle, outer keywords.

Restrictions

This style is part of the EXTRA-PAIR package. It is only enabled if LAMMPS was built with that package. See the Build package page for more info.

Default

none

(Stiles) Stiles, Hubbard, and Kayser, J Chem Phys, 77, 6189 (1982).

(Lenart) Lenart, Jusufi, and Panagiotopoulos, J Chem Phys, 126, 044509 (2007).

(Jusufi) Jusufi, Hynninen, and Panagiotopoulos, J Phys Chem B, 112, 13783 (2008).